AC-14 Marine Anchor High Holding Power Anchor

High holding power (HHP) anchors

A “high holding power” anchor is to be suitable for ship’s use and is not to require prior adjustment or special placement on the sea bottom.

When special type of anchors designated “high holding power anchor” of proven superior holding ability are used as bower anchors, the mass of each anchor may be 75% of the mass required for ordinary stockless bower anchors in the Table 1.

For approval and/or acceptance as a HHP anchor satisfactory tests are to be made on various types of bottom, and the anchor is to have a holding power at least twice than of an ordinary stockless anchor of the same weight. Full scale tests are to be carried out at sea on various types of bottom and to be applied to anchors the weights of which are, as far as possible, representative of the full range of sizes proposed; for a definite group of the range the two anchors selected for testing (ordinary stockless anchors and HHP anchors) should be of approximately the same weight, and should be tested in association with the size of chain cable appropriate to this weight.

Product Details:

• High Holding Power anchor
• Material: ZG200-400
• Nominal Weight: 56kg to 20000kg
• Finishing: black painting or hot dip galvanized
• Optional Material: Stainless steel
• Certificate: DNV-GL, BV, ABS, LRS, RINA, IRS, RS, CCS, KR, NK
• Other Anchor Type: Delta Anchor Danforth Anchor MK5 Anchor MK6 Anchor Spek Anchor Hall Anchor
• Anchor Chains Mooring Chains Steel Mooring Buoy
• 6225KG 6525KG 6975KG 7425KG 7878KG 8775KG 8325KG 9225KG 9675KG 10125KG 10575KG 11025KG in stock for detailes please contact us

10275kg AC-14 7 Days to docking yard with LR cert.

Our Advantage:

1. Are you Manufactuer?

Yes we are Anchor Chain Manufactuer, our factory located near changjiang river with convenient transportation to shanghai port

shanghai docking place, chengxi qidong docking place and zhoushan docking place

2. Your quality?

Our factory have KR LR BV NK CCS ABS DNV GL RMRS RINA ...all IACS approved you can trust our quality.

we have skillful technicist team and quality team and with IACS approved workers.

3. Your production?

We have 30 sets flash butt welded lines can production 16mm~200mm anchor chain, with 2200T/Month over 30000T annuel

and our normally production time is 15days. with IACS cert.

4. Could you offer other advantage?

we keep 50~122mm anchor chain steel round bar and anchor chain in stock can delivery 1~5days for 10~22 length.

And we can offer anchor chain repair install and clean work in china singpaore or other Euro port can offer you on stop service, save your docking time and cost.

And we keep some anchor in stock with LR / NK cert.

China Shipping Anchor Chain (Jiangsu) Co., Ltd was founded in 2010, total investment nearly one billion, intending to be the most modernized product line in China, manufacturing welded anchor chain, offshore mooring chain and steel structured anchor. We mainly manufacture marine anchor chain from 22mm to 162mm, offshore mooring chain, ship anchor chain, stud link anchor chain, studless anchor chain, galvanized anchor chain, offshore chain, buoy chain, marking chain, buoy chain, chafing chain, steel structured anchor, flipper delta anchor, delta anchor, stevpris anchor, MK5 anchor, MK6 anchor, spek anchor, hall anchor, admiralty anchor, AC-14 HHP anchor, aquaculture anchor, steel structured buoy, mooring buoy, shipboard fittings and so on, we can supply with CCS, BV, LR, ABS, KR, NK, DNV-GL and other certificate from 11 class societies and admiralty approval.

Our company is located in Jingjiang of Jiangsu province, near to the sea, convenient for load and sea transportation. First phase project covers 180,000 square meters, including 70,000 square meters. Current staff more than 500 personal, including engineer and professional managing staff 75 people. Our technical staff including senior engineer and technician, possess rich experience in design, manufacturing and quality control of anchor chain, which insure us manufacturing high quality products. Our managing stuff focus on product quality and innovation, intending to be leading enterprise in anchor chain manufacturing field.

Currently, first phase project, total investment nearly half billion mainly possesses 5#, 7#, 9#, 11# anchor chain manufacturing machine, tempering machine, load test machine, cutting machine, property testing machine and shot blasting machine. Computer aided technology and network information technology is widely used in our factory, we established computer management information system, which allocate resources properly and improve the production efficiency.

Our company believes in scientific outlook on development, we improve our quality by innovation and develop steadily, harmoniously, safely, and scientifically by improving our efficiency and economic effectiveness. We focus on demands of clients, we serve our clients with high quality products and thoughtful service, we believe Aohai will be a shining star in anchor chain industry.